📘
PANOPTES User Guide
  • PANOPTES User Guide
  • FAQ
  • Building
    • Getting Started
      • Building Overview
      • Safety Guide
      • Parts Listing
    • Hardware Build
      • Camera Box
        • Camera Setup
        • Electronics
        • Hardware and Assembly
        • 4 Camera Design
      • Control Box
        • Electronics
        • Hardware and Assembly
      • Power and Network
        • Network Setup
        • Host Site (Mains) Power
        • UPS and Battery Backup
        • Power Distribution
      • Mount and Pier
        • Pier
          • Fabrication
          • Assembly
        • Mount
          • Assembly
          • Saddle Plate Rotation
          • Balancing
    • Software
      • Installing OS
      • Installing POCS
        • PANOPTES Unit Install
        • Developer Install
      • Arduino - Power Distribution
  • Deploying
    • Deployment Guide
      • Site Planning
      • Camera Focus
      • Polar Alignment
        • Overview
        • Drift Method
        • Procedure
          • Find Misalignment
          • Fix Misalignment
  • Running
    • Operating Guides
      • Automated Operation
      • Manual Operation
Powered by GitBook

Links:

  • Website
  • Forum
  • Software

2023 Project PANOPTES

On this page
  • Hardware
  • Configuration

Was this helpful?

  1. Building
  2. Hardware Build
  3. Power and Network

Network Setup

Setting up the router.

PreviousPower and NetworkNextHost Site (Mains) Power

Last updated 4 years ago

Was this helpful?

A PANOPTES unit uses a mini router to provide a consistent experience for all users. This router allows for a wired connection to the control computer as well as a wireless network that can be used for other devices.

Using the router means that you can create a mini network that will stay the same for both the build as well as the final installation.

Hardware

Configuration

The back of the GLiNet router, showing the IP address and SSID.