📘
PANOPTES User Guide
CtrlK
  • PANOPTES User Guide
  • FAQ
  • Building
    • Getting Started
      • Building Overview
      • Safety Guide
      • Parts Listing
    • Hardware Build
      • Camera Box
        • Camera Setup
        • Electronics
        • Hardware and Assembly
        • 4 Camera Design
      • Control Box
        • Electronics
        • Hardware and Assembly
      • Power and Network
        • Network Setup
        • Host Site (Mains) Power
        • UPS and Battery Backup
        • Power Distribution
      • Mount and Pier
        • Pier
          • Fabrication
          • Assembly
        • Mount
          • Assembly
          • Saddle Plate Rotation
          • Balancing
    • Software
      • Installing OS
      • Installing POCS
        • PANOPTES Unit Install
        • Developer Install
      • Arduino - Power Distribution
  • Deploying
    • Deployment Guide
      • Site Planning
      • Camera Focus
      • Polar Alignment
        • Overview
        • Drift Method
        • Procedure
          • Find Misalignment
          • Fix Misalignment
  • Running
    • Operating Guides
      • Automated Operation
      • Manual Operation
Powered by GitBook
On this page

Was this helpful?

  1. Building
  2. Hardware Build

Power and Network

All robots need power. Most robots need to communicate. PANOPTES robots need both.

Network SetupHost Site (Mains) PowerUPS and Battery BackupPower Distribution
PreviousHardware and AssemblyNextNetwork Setup

Last updated 2 years ago

Was this helpful?

Links:

  • Website
  • Forum
  • Software

2023 Project PANOPTES