📘
PANOPTES User Guide
  • PANOPTES User Guide
  • FAQ
  • Building
    • Getting Started
      • Building Overview
      • Safety Guide
      • Parts Listing
    • Hardware Build
      • Camera Box
        • Camera Setup
        • Electronics
        • Hardware and Assembly
        • 4 Camera Design
      • Control Box
        • Electronics
        • Hardware and Assembly
      • Power and Network
        • Network Setup
        • Host Site (Mains) Power
        • UPS and Battery Backup
        • Power Distribution
      • Mount and Pier
        • Pier
          • Fabrication
          • Assembly
        • Mount
          • Assembly
          • Saddle Plate Rotation
          • Balancing
    • Software
      • Installing OS
      • Installing POCS
        • PANOPTES Unit Install
        • Developer Install
      • Arduino - Power Distribution
  • Deploying
    • Deployment Guide
      • Site Planning
      • Camera Focus
      • Polar Alignment
        • Overview
        • Drift Method
        • Procedure
          • Find Misalignment
          • Fix Misalignment
  • Running
    • Operating Guides
      • Automated Operation
      • Manual Operation
Powered by GitBook

Links:

  • Website
  • Forum
  • Software

2023 Project PANOPTES

On this page
  • Whole pier
  • Top plate
  • Bottom plate

Was this helpful?

  1. Building
  2. Hardware Build
  3. Mount and Pier
  4. Pier

Assembly

PreviousFabricationNextMount

Last updated 2 years ago

Was this helpful?

Whole pier

Top plate

Bottom plate